Welcome to Zhicheng Instrument
Overview
it Simulate high temperature, low temperature, cold resistance, humidity or constant temperature and humidity environments to test product reliability, stability and other parameters. It is suitable for testing electronics, electrical appliances, aviation, chips, semiconductors, automobiles, chemicals, scientific research and other fields, and can provide a basis for improving product quality and reliability.
Standard
- GB/T 5170.2-2008 Temperature test equipment
- GB/T 5170.5-2008 Wet and hot test equipment
- GB/T 10592-2008 High and low temperature test chamber testconditions
- GB/T 10586-2006 Wet and hot test chamber technicalconditions
- GB/T 2423.1-2008 (IEC60068-2-1:2007) Experiment A: High temperature test method
- GB/T 2423.2-2008 (IEC60068-2-2:2007) Experiment B: Lowtemperature test method
- GB/T 2423.4-2008 ( IEC60068-2-30:2005)Experiment Db : Alternating wet and hot test
- GJB 150.3A-2009 Military equipment lab environmental test nnethod Part 3: High temperature test
- GJB 150.4A-2009 Military equipment lab environmental test nnethod Part 4: Low temperature test
- GJB 150.9A-2009 Military equipment lab environmental test nnethod Part 9: Wet and hot temperature test
- And ISO.JIS.IECTemperature and Humidity test standard.,ete
Specifications
| Product model | ZC-TH80 | ZC-TH150 | ZC-TH225 | ZC-TH408 | ZC-TH1000 |
|---|---|---|---|---|---|
| Inner chamber size W*H*D (mm) | 500*400*400 | 500*600*500 | 600*750*500 | 800*850*600 | 1000*1000*1000 |
| Exterior chamber size W*H*D (mm) | 730*1550*1530 | 780*1630*1590 | 850*1850*1650 | 1090*1940*1700 | 1290*2070*2050 |
| Temperature Range | -20℃ ~ +150℃ -40℃ ~ +150℃ -70℃ ~ +150℃ | ||||
| Heating up Time | -20℃ ↑ 100℃ approx 35 min -40℃ ↑ 100℃ approx 45 min -70℃ ↑ 100℃ approx 55 min | ||||
| Cooling down Time | +20℃ ↓ -20℃ approx 45 min +20℃ ↓ -40℃ approx 55 min +20℃ ↓ -70℃ approx 90 min | ||||
| Humidity Range | 20% ~ 98% R.H (5% ~ 98% R.H A dryer or humidifier ) | ||||
| Temperature uniformity | ≤ ±2℃ (measurement SENSOR placement point, 1/10 away from the inner box wall ) | ||||
| Temperature fluctuation | ±0.3℃ | ||||
| Humidity deviation | ±3% R.H(when humidity is >50% R.H时)，±5% RH(when humidity is ≤ 50% R.H时) | ||||
| inner and outer box | SUS304 stainless steel + High-strength cold-rolled steel with double-sided electrostatic resin baking paint | ||||
| Insulation Materials | High temp-resistance and strength PU polyurethane foam insulation material, ultra-fine glass fiber | ||||
| Protection Device | leakage protection switch, compressor overload protection, refrigerant high pressure protection, temperature and humidity empty burning protection, water shortage alarm protection, fault alarm system, phase sequence protection (limited to 380V power supply system) | ||||
| Control System | PID balanced temperature and humidity control system, with options for fixed value test/program test | ||||
| Refrigeration system | Original imported mechanical compressor (Tecumseh, Bitzer, Copeland, Bock), heat sink evaporator | ||||
| Cooling system | Air-cooled or water-cooled, single-stage compressor (+25℃ ~ -40℃) / double-stage compressor (-50℃ ~ -70℃) | ||||
| Power supply | 1Φ220V AC ±10% or 3Φ380V AC ±10% 50/60Hz | ||||
| Power | Depends on low temperature and volume | ||||
| Accessory | Observation window,test hole (Φ50mm)Lighting,adjustable partition gauze,optional recorder,glass door,operation hole | ||||
Keywords
One-stop service process
Company Qualifications
Programmable Temperature and Humidity Test Chamber
Programmable Temperature and Humidity Test Chamber
Zhicheng climate chambers are designed to simulate
temperature and humidity environments for reliability
testing of products.
Suitable for:
• Electronics
• Semiconductor
• Automotive
• EV Battery
• Aerospace
• Laboratory
Contact Information
Category
Related products
There is no relevant data for the time being, please add it backstage!
